Offline version of UnicodeNepali.Com V3 Converter

Sometimes, we might need to use unicodenepali.com converter and we might not have access to the internet. But, by just saving the complete webpage of the converter, you could get the offline version of the converter. Now you can take the downloaded html and its related files anywhere and open the html file to run the converter offline.

Even better, if you are windows user, you could save .hta version from Internet explorer and could make a single file of the converter in your own computer.

Go to the URL: http://www.unicodenepali.com/v3/convert.html

and press Ctrl+S to save the complete webpage. See the screenshot below:

Hope you find this useful.

Read more...

Netpoint Protocol installation and setup[How To]

Recently, I and my friends had to implement netpoint protocol to setup the server/client eLibrary environment in one of the schools in Nepal. In this post, I will list the steps to follow while setting up such terminals. By the way, the terminals we used were Sunde terminals. This is pretty short tutorial without going into details because I assume that the person who performs these installation has good knowledge of how computers work.

a) Install Windows XP(or any other windows version) in the server machine

b) Select and run one of the Sunde terminal clients. Its for downloading the necessary softwares to our server machine as the necessary softwares are hosted in the Sunde terminal clients.

c) Connect the server and client with ethernet cable and set static IP address for both the server and client.

d) Run the internet explorer and type the I.P. address of the sunde client in address bar.

e) You'll find a page from where you can download netpoint setup file and user guide as well. (Also, xRDP for linux is available for download).

f) Install the netpoint setup software in your server machine and it will have netpoint protocol and netpoint management GUI installed in it.

g) Now you'll have to add users and assign the newly created users to "Remote Desktop Users" group. For that, right click in My computer -> Manage and from there, you can add users and assign them to groups from "users and groups" section. I would let you figure out how to do this. Btw, create the users with passwords otherwise you'll have to perform group policy editing to allow logging in of remote users without passwords(to do that, use gpedit.msc)

h) If you want to setup DHCP server in your server, you could do so. Otherwise setting up the static IP would be enough. Now, set the static IPs for all the clients and also set the server IP in all those clients.

Your sunde terminals are now ready to go. If you get messages like "can not connect to server", ensure that server IP in the clients is correct and also make sure the physical things such as NIC, ethernet cable, etc. are working correctly. If you get the login window and can't login with the user, make sure those users are assigned to group "Remote Desktop Users". Also, sometimes you might need to turn firewall off in the server.

I might have missed some stuffs while writing this. If you face any problem, feel free to comment. And I am sorry that I could not provide you any screenshots. Maybe sometimes later when I got the next netpoint deployment(but its unlikely). Also, you can use Linux in the server and in that case, you will have to use xRDP or any other RDP protocol server software for linux.

Read more...

Graphical management of runlevel init scripts with Boot-Up Manager

I've been using boot-up manager to graphically configure and manage the init scripts run according to the run level. And its pretty useful. So I thought to share about this application in this post.



From http://www.marzocca.net/linux/bumdocs.html#introduction :

The scripts located in /etc/init.d are part of the bootup sequence of every Debian-like distro. Very often Ubuntu's documentation and guides have suggested - in order to deactivate init scripts - to change the permissions of the scripts in /etc/init.d, making them non-executable. This will have the following consequences:

* You'll get an error message at boot time (to avoid it you need to patch all the scripts);
* You are breaking the logical chain stated in debian-policy concerning runlevel configuration.

If the logic of a debian-like system boot up sequence is not very clear and familiar to you, you should not play with symlinks, permissions, etc. In order to avoid messing up your system, Boot-Up Manager will automate all of your configuration in a nice and clean graphical interface.

From http://www.marzocca.net/linux/bum.html :

Boot-Up Manager is a Perl-Gtk2 application to handle runlevels configuration of any debian derivative system. With this program the user will easily start and stop boot-up scripts, without the necessity to handle thru complex links and permissions.

Boot-Up Manager has been developed and tested on Ubuntu, but as it only relies on Perl-Gtk2 libraries, it can be run on any Debian-like system.

To install Boot-up manager under ubuntu, run the following terminal:

sudo apt-get install bum

Deb files are available for download for other debian based systems.

In order to run the application, go to System-> Administration -> Boot-up Manager or type the following in command menu:

su-to-root -X -c bum

You could refer to the above mentioned links for more technical details on bum.

Read more...

LTSP deployment visit to Baglung and Myagdi

With the help of HeNN(Help Nepal Network), we've been on our visit to two schools of Baglung and Myagdi. We were the group of three, Arnab Sarkar, Bikash Kharel and me(we all are from Kathmandu University). Our deployment visit has come to an end and we are on our way back to Dhulikhel. The visit was full of fun and gave me new experience of working in team(though the team was extremely small :p). We had lots of fun in both places and received pretty good response from the local people.

Our journey started on March 4 and we took our bus to Bhimgithe-8, Khaala, Baglung. The journey was full of adventures. Thank god, the bus was third class due to which I got a chance to taste the tea without sugar (It was great, btw :D). We didn't sleep for the whole night and our dinner was at around 11 pm at night. The real adventure began when we reached Ridi, one of the more known places from Gulmi. The road was, well, so narrow that only the tires of the bus were on the road and outer parts of the bus were out of the track. A small mistake and our bus would fall down to the river and we were excited and scared at the same time. Moreover, the driver of our bus had not been sleeping for more than 24 hours so we were even more scared. On the next day of our journey, we had to face some problem with traffic police regarding the horn used in the bus.

At around 10:30 we arrived at Khaala, our first destination. We were excited to see such a big mass from such a small village for welcoming us. All the computer materials and accessories were stored in the school's storeroom and we were glad to find all the materials in the good condition after such a "ghandryaang-ghundrung" journey. The furnitures and computer room were not ready yet so we took full rest on our first day. Next day, we started to setup the LTSP clients and the task was completed in around 2 hours. We were helped by the local villagers, teachers and even the principal of the school in setting up the system. After finishing the setup, we started to train the teachers and students. Everyone seemed to be so interested with this new "computer" object and we felt so glad to see such involvement of everybody. On the next day, we again gave training to the teachers as well as students so that they would be familiar with the system. In the late hours, we provided teachers information about how to troubleshoot the general problems they might face with the system. We now had to go to Histan-6, Rima, Myagdi for our next deployment task.

Next day, we headed to Myagdi district for our next deployment at Adarsha Madhyamik Vidhyalaya, Rima, Myagdi. We spent our first night in Myagdi in Tatopani. Next day, we took a short warm shower in Tatopani and then quickly headed to Beni to catch the bus for Baisari. In next two hours, we were already in Baisari. Now one of the toughest time of our visit had come and we had to walk uphill for around 3 hours(local villagers require 1.5 hours :P). We were tired and hence decided to pass that night at Aula, 30 min below Rima. Next day, we went to Rima school and soon thought of starting our work. But unfortunately, the electricity transmission line was down and we had to wait for the next day. We faced multiple problems due to electricity and lack of materials in Rima school. Edubuntu didn't seem to like the hard disk and never wanted to install. Btw, it was not actually LTSP deployment but it was a RDP deployment. Not being successful with Edubuntu, we decided to install Windoze XP and again with more hurdles(loadshedding being the major one), we finished all the tasks. We had to stay for 4 days at Rima to finish all the tasks. Finally the system was up and we were very glad to see it working.

We are right now on our way back to Dhulikhel and we've managed a small meeting with Mahabir Pun, the MAN from Myagdi. Both deployments were successful and personally I gained lots of experience and practical knowledge(Running LTSP under virtualbox and deploying a full LTSP terminals are two entirely different things).

*Note: It was written a while ago when I was in Myagdi. I am too lazy to edit :D

Read more...

My first LTSP deployment visit

I am excited about my first LTSP(Linux Terminal Server Project) deployment visit to Baglung and Myagdi districts of Nepal. I shall not be able to write in the blog for a while because of this. I hope to have fun and make good experience in my first LTSP visit. :)


Read more...

Autostarting programs on login in Ubuntu [How To]

If you want to start any program in your ubuntu installation whenever you login then you can just create a symbolic link in a special folder located at ~/.config/autostart/(that is somewhere inside of your home folder). The process is pretty easy and most of the guys out there might have already understood what you have to do but still I am writing the process for those who might get stuck on the way.

I'll demonstrate, as an example, how to autostart skype at the login time. As stated earlier, all you have to do is create a symbolic link to skype executable file as below. The command is typed in terminal(gnome-terminal).

ln -s /usr/bin/skype ~/.config/autostart

Btw, to find the location of any executable in linux, you can use the which command like below:

which skype

I hope this helps. Thanks. :)

Read more...

How to get things for free in internet [Google dorks]

Well its been a few days I haven't posted. Today I have come with an interesting post that will help you get things for free in internet. Of course, it is not legal but it works in many cases but not always. And many of the results might be some craps.

Following are the list of the google dorks that will help you get some of the commercial softwares for free. Google dorks are the keyword phrases that can be searched with the google search engine.

intitle:"Thank You For Your Order" intext:Click Here to Download
intitle:"Thank You For Your Purchase" intext:Click Here to Download
inurl:/thankyou*.html intitle:Thank you for your order! intext:Click Here to Download
intitle:"Thank You For Your Order!" intext:download
inurl:thanks intext:"Thank You For Your Order!" "Click Here" filetype:html

The above dorks are just the examples. You can modify them and do some experiments on your own to search for specific domains, etc. I hope this is useful. Thanks :)

Read more...

How to fix the USB support in virtualbox

I installed virtualbox 4 after removing the OSE version and I tried to test the USB support. But I didn't find it working so I tried few things. And on diving to the internet, I figured out that I must be the member of the group "vboxusers" to be able to have USB support in my virtualbox.

Follow the steps as stated below:

1) Go to System->Administration->Users and groups. You'll see the screen like below:

2) From there, click on Manage groups and then select the vboxusers group and edit its property. Now in the properties window, check your username as marked for the group. The screenshot below would clarify you.

Alternatively this all could be achieved by a simple command as below(Here, we are adding the user "samar" to the group vboxusers):

samar@Techgaun:~$ sudo useradd -G vboxusers samar

In order to verify that everything went well, you could type in terminal:

samar@Techgaun:~$ grep vboxusers /etc/group

3) Now you will have to restart(or just logout from your account) and then re-login to your account. Now virtualbox will allow you to use USB devices. When your virtual machine is on, just go to Devices->USB devices and select the one that needs to be active.

I hope this helps you. :)


Read more...